Liquid Polydadmac | PDADMAC | Polymer LONGWATER®
Polydimethyl diallyl ammonium chloride is a strong cationic polyelectrolyte, Abbreviation is PDADMAC or Polydadmac.It can be used at water treatment and as the industry additives. Light Yellow Liquid Type: Industrial Water Grade
Polydadmac This product's technical name is polydimethyl-dislkelen-ammonium chloride/polydadmac, it is cationic polymer and it can be completely dissolved in water. Properties The polymer body contains strong cationic group radical and activated-adsorbent group radical which can destabilize and flocculate the suspended solids and the negative-charged water soluble matters in the waste water
High Viscosity Polydadmac Coagulant Drinking Water
PolyDADMAC DA406 is high viscosity coagulant for wastewater treatment and ETP plant . Chemical name: Poly Dimethyl Diallyl Ammonium Chloride (Shortened PolyDADMAC or PDADMAC). CAS NO.:26062-79-3 . Polydadmac Description . BLU DA406 is 40% solid content PolyDADMAC. It is a liquid cationic polymer of very high molecular weight, with a high charge density.
In the oil field chemicals, the PolyDADMAC can be used in clay stabilizer, acid fracturing cation additive etc. When used alone, PolyDADMAC should be diluted to the concentration of 0.5%-0.05% (based on solid content). When PolyDADMAC be used to treat different source water or waste water, the dosage is based on the turbidity and the concentration of the water. The most economical dosage is based on the trial.
High Viscosity & Molecular Polydadmac for Water Treatment
High viscosity and molecular weight polydadmac (Poly Dimethyl Diallyl Ammonium Chloride) has a very higher viscosity from 12000cps -80000cps. Chemical name: Poly (dimethyl diallyl ammonium chloride) (PDMDAAC) Trade name: POLYDADMAC. CAS NO: 26062-79-3. Formula:(C8H16NCl)n. PolyDADMAC / PDADMAC / PDMDAAC /.
Reverse Osmosis & Water Treatment in Saudi Arabia Saudi Arabia is a nation of about 34 million people in the Middle East, bordering the Persian Gulf and the Red Sea, north of Yemen. Saudi Arabia has an oil-based economy with strong government controls over major economic activities.
AES ARABIA LTD
AWC-A-909 is a synthetic high molecular weight anionic polyelectrolyte. It is completely soluble in water forming solution of high viscosity. AWC-A-909 has been specifically designed for use in a wide variety of industrial Manufactured in the Kingdom of Saudi Arabia by: P.O. Box 105689, Riyadh 11656, Kingdom of Saudi Arabia
Water issues in the Kingdom of Saudi Arabia Upon joining Kaust in 2012, Hong observed that there were two significant problems in regards to wastewater reuse programs in Saudi Arabia. The first problem being that roughly 50 % of the country is connected to sewage pipelines, with the remaining 50 % reliant on septic tanks or on the direct
Synthesis and Characterization of Different Molecular
1Riyadh Colleges of Dentistry and Pharmacy, 84891 Riyadh 11681, Kingdom of Saudi Arabia. Tel: 920000842. Fax: 920000843 water and wastewater treatment have been introduced in late 1950. Synthetic polyelectrolytes have been used Viscosity average molecular weight of polyacrylamide
PolyDADMAC is an artificially produced polymer and is one of a class of synthetic polymers that are now widely used. These polymers have a high molecular weight and form very stable and readily removed flocs, but tend to be more expensive in use compared to inorganic materials. The materials can also be biodegradable. Scope of the Report:
Chemicals In Saudi Arabia Suppliers, all Quality Chemicals
Chemicals In Saudi Arabia, Chemicals In Saudi Arabia Suppliers Directory - Find variety Chemicals In Saudi Arabia Suppliers, Manufacturers, Companies from around the World at gas disposal chemicals ,organic chemicals ,medical chemical, Electronics Chemicals
Polydadmac POLYDADMAC 40% is a cationic polymer and it can be completely dissolved in water. It is a formaldehyde free color fixing agent. It is adaptable to wide range of PH value between 4.0 and 10.0.
- Can nonionic polyacrylamide be used as a gel fracturing fluid?
- Nonionic polyacrylamide (NPAM) with controlled molecular weight was successfully synthesized as a gel fracturing fluid by aqueous solution polymerization.
- What is nonionic polyacrylamide?
- Nonionic polyacrylamides Nonionic polyacrylamides represent the smallest group of acrylamide-based polymers, representing about 25% of the total polyacrylamide market. Nonionic polyacrylamide is somewhat misleading since in the manufacture of acrylamide, regardless of the route, some degree of hydrolysis of acrylamide occurs.
- Which comonomer is used for the production of anionic polyacrylamides?
- The workhorse comonomer for the production of anionic polyacrylamides is acrylate salts of acrylic acid. These anionic polymers can be prepared as various mono- and divalent metal salts and other positively charged inorganic and organic counterions of the polymerization of acrylic acid with acrylamide (see Fig. 34.4 ).
- What type of polyacrylamide is used in oil industry?
- The polyacrylamide use can be anionic, cationic, or nonionic with various ratios of the comonomers used in the case of the anionic and cationic polymers. The anionic polyacrylamides in the oil field industry are designated by the generic name of partially hydrolyzed polyacrylamide (PHPA), although they are in actuality copolymers .
