flopam fo4490 for slaughter water treatment cationic in netherlands

flopam fo4490 for slaughter water treatment cationic in netherlands
Tags: , , , , , , , , ,
  • How flopam an910 is used to remove dissolved organic matter?
  • Samples were flocculated by direct addition of FloPam AN910 into 250 ml sample and stirring for twenty minutes. Efficiency of flocculation was measured by turbidity ( Fig. 16) and ICP MS (Full elemental breakdown is included in the ESI †) and both suggest 20 mg l −1 of polymer resulted in most efficient removal of dissolved organic matter.
  • Can flopam fo4115 be detected at pH 2?
  • A series of solutions containing cationic polymer FloPam FO4115 (a polymer with less cationic charge density than FloPam FO4650 MPM so remains capable of forming an IPC at pH 2) were mixed with a fixed concentration of 113 mg ml −1 probe at pH 2 ( Fig. 5 ). This was carried out to determine the limits of detection of this polymer.
  • How efficient is flocculation based on turbidity of flopam an910 polymer?
  • Efficiency of flocculation was measured by turbidity ( Fig. 16) and ICP MS (Full elemental breakdown is included in the ESI †) and both suggest 20 mg l −1 of polymer resulted in most efficient removal of dissolved organic matter. Fig. 16 Turbidity of raw and flocculated SA samples with increasing loading of FloPam AN910 polymer.
  • What is the concentration of flopam fa920?
  • A series of measurements were made with the concentration of PAA-ACE fixed at both 70 and 700 mg l−1, the pH adjusted to 2 and the concentration of FloPam FA920 was varied from 0 to 200 mg l−1 ( Fig. 4 ).