Municipal Drinking Water Treatment - MIOX Corporation
Up to 50% disinfection byproduct reduction at the same dosages. MIOX is a cutting-edge technology company that has been making water safe to drink for twenty years. Many communities are turning to MIOX chemistries for their drinking water disinfection because the chemistry is a proven disinfectant for improving the quality and safety of drinking water with significant economic savings.
Oil & Gas water treatment including frac and produced water recycling Food and beverage applications including clean-in-place and process water Legionella prevention at hotels, casinos, universities, and hospitals In addition, MIOX’s on-site chemical generators are much more compact in design compared to competition.
Aquatics Water Treatment, Swimming Pool - MIOX Corporation
MIOX’s patented Mixed Oxidant Solution (MOS) chemistry for swimming pool water disinfection improves safety, increases performance, reduces maintenance time, and lowers operating costs. With minimal maintenance, our easy-to-use MOS system not only improves pool water safety, it eliminates the harsh qualities of traditional chlorine treatment to create a noticeably improved swimming experience.
A variety of continuous dosing strategies and/or chemical cleaning regimes are used, with varying degrees of success, to keep it under control. MIOX Mixed Oxidant Technologies effectively remove and control biofouling when used as a pretreatment chemical, as part of the membrane cleaning regime, or both.
MIOX Corporation - Johnson Matthey`s Water Technologies
With over twenty years of experience in the water disinfection market and thousands of MIOX installations in over 40 countries, MIOX chemistries are cleaning over 7 billion gallons of water per day. Safer, economical and significantly more effective, MIOX is revolutionizing the process of making water safe.
If you run a Water Treatment Plant, you’re facing one big challenge—you need to provide the highest quality water while keeping your costs down… Imagine improving your water quality while
Challenges in Municipal Water and the MIOX Solution
Dose: 0.6 mg/L Hypo Residual: 0.4 mg/L CASE STUDY A city in Texas was using Gas Chlorine where brown biofilm slime on pipes in distribution system commonly noticed. Distance from Treatment Plant: 200 feet Distance from Treatment Plant: 1/2 mile Mixed Oxidant Solution Helps Remove Biofilm BEFORE MIOX 22 days AFTER MIOX BEFORE MIOX 1 Year AFTER MIOX
The Siemens portfolio for process instrumentation, when combined with the liquid analysis systems from HACH, provides solutions to meet all requirements in the water and waste water industry – from efficient process control and guaranteed water quality to sure compliance with legal guidelines.
Distributed Power Companies and Suppliers for the Pulp
MIOX Corporation is the innovator and industry leader in on-site chemical generators for water disinfection. MIOX technology combines salt, water and power to generate cost-effective disinfectant chemistries on site. Our expertly designed chemical generators give customers the freedom to produce
Process Instrumentation Solutions for Water As one of the world’s leaders in industry automation and an experienced provider of integrated technologies, we offer products and systems tailored to the requirements of the water and wastewater industry.
Type 604/605 Pneumatically Actuated Dosing Valve - GF
The Type 604/605 Pneumatically Actuated Dosing Valve is designed for high frequency actuation and very high cycle counts. By coupling an actuator with improved efficiency with a diaphragm with improved cycle life, Georg Fischer is able to offer an actuated dosing valve that has been successfully tested to more than 2,000,000 cycles.
Copper silver ionization is the most effective technology for systemic disinfection of Legionella in potable water systems. In field evaluations, this technology has yielded the best results over a wide range of water conditions and temperatures, and is backed by more than 100 independent research studies.
- What type of polyacrylamide is used in oil industry?
- The polyacrylamide use can be anionic, cationic, or nonionic with various ratios of the comonomers used in the case of the anionic and cationic polymers. The anionic polyacrylamides in the oil field industry are designated by the generic name of partially hydrolyzed polyacrylamide (PHPA), although they are in actuality copolymers .
- What is cationic polyacrylamide (CPAM)?
- J. Pharm. Biopharm.54 (2002) 41–50. 10.1016/S0939-6411 (02)00036-X Search in Google Scholar Cationic polyacrylamide (CPAM) was prepared in aqueous solution by free radical polymerization of methacryloyloxy ethyl trimethylammonium chloride (DMC) and acrylamide (AM). A redox initiator system was used.
- Which comonomer is used for the production of anionic polyacrylamides?
- The workhorse comonomer for the production of anionic polyacrylamides is acrylate salts of acrylic acid. These anionic polymers can be prepared as various mono- and divalent metal salts and other positively charged inorganic and organic counterions of the polymerization of acrylic acid with acrylamide (see Fig. 34.4 ).
- What is an anionic polyacrylamide?
- Anionic polyacrylamides make up the largest portion of the polyacrylamide market. The polymers can be prepared over a wide range of anionic charges and molecular weights (1000 to > 20,000,000 molecular weight). The workhorse comonomer for the production of anionic polyacrylamides is acrylate salts of acrylic acid.
