Novex™ TBE Gels, 6%, 10 well - Thermo Fisher Scientific
Novex TBE Gels provide the highest resolution possible for analyzing restriction digests and PCR products. DNA fragments are clearly resolved into sharp, tight bands. Novex TBE gels are designed to run on the XCell SureLock Mini-Cell.Formulation Novex TBE gels are manufactured with high-purity Tris
Pkg of 1, 10% polyacrylamide gel, 12 + 2-well, 45 μl, 13.3 x 8.7 cm (W x L), for use with Criterion and Criterion Dodeca cells
Novex TBE Gels, 10%, 10 well from Thermo Fisher Scientific
Formulation Novex TBE gels are manufactured with high-purity Tris base, boric acid, EDTA, acrylamide, bisacrylamide, TEMED, and APS. Recommended buffers For optimum performance, Novex TBE Running Buffer and Novex Hi-Density TBE Sample Buffer are strongly recommended for use with these gels.
Choose this 10% Criterion TBE Polyacrylamide Midi Gel for separation of nucleic acids from 50 bp to 1.5 kb. These native gels separate small double-stranded DNA (dsDNA) molecules such as PCR products.
Shop All Polyacrylamide Gels | Thermo Fisher Scientific
Novex® TBE-Urea Gels are denaturing polyacrylamide gels that resolve single-stranded DNA oligos or RNA into sharp, distinct bands. These gels are optimized for the analysis and purification of products ranging from 20-800 bases, making them an ideal choice for synthetic oligo analysis and purification, RNase Protection Assays (RPA), in vitro transcription studies, and Northern blot analysis.
Novex® TBE-Urea Gels are denaturing polyacrylamide gels that resolve single-stranded DNA oligos or RNA into sharp, distinct bands. These gels are optimized for the analysis and purification of products ranging from 20-800 bases, making them an ideal choice for synthetic oligo analysis and purification, RNase Protection Assays (RPA), in vitro transcription studies, and Northern blot analysis.
UltraPure™ TBE Buffer, 10X - Thermo Fisher Scientific
UltraPure 10X TBE Buffer is a sterile-filtered solution of 1 M Tris, 0.9 M boric acid, and 0.01 M EDTA used to prepare 1X buffer for polyacrylamide and agarose gel electrophoresis. UltraPure 10X TBE Buffer is available in a 1 L plastic bottle or in a 10 L Cubitainer box.Performance and quality testi
To generate the APH(3′)II single-substitution libraries, full-length oligonucleotides were first isolated from the synthesized pools using 10% TBE-Urea polyacrylamide gels (Life Technologies, Carlsbad, CA, USA).
Association of a functional variant downstream of TNFAIP3
The 100-bp insertion and/or 99-bp deletion amplification products were separated and detected on 6% polyacrylamide gels run with 1X TBE buffer for 945 African American cases, 1,307 African
Samples were applied onto 8% (wt/vol) polyacrylamide gels in 1X TAE with a denaturing gradient ranging from 25 to 50% UF [100% corresponded to 7 M urea and 40% (vol/vol) formamide]. Electrophoresis was run at 60°C for 10 min at 20 V and then for 3 h at 200 V.
Diversity and Genetic Structure Inferred with
PCR products were separated in 8% non-denaturing polyacrylamide gels in 1X TBE (45 mM Tris-Borate, 1mM EDTA) buffer solution at 250V for 2 h 30 min. After electrophoresis, the PCR products were visualized with silver staining [32]. Gel images were captured with the KODAK Gel Logic 100 System (Kodak, Rochester, NY, USA).
In lanes 5–7, SB, TBE, and TAE gels were run at legacy conditions (125 V) for 75 min. The power source (Model FB 570; Fisher Biotech, Pittsburg, PA, USA) displayed current flow at set voltage. All runs used a horizontal rig (MGU-500; CBS Scientific, Del Mar, CA, USA) and had 700 mL total volume of medium in the reservoirs and gels of 10 cm
- Do polyaluminium chloride and anionic polyacrylamide water treatment residuals adsorb phosphorus?
- Polyaluminium chloride and anionic polyacrylamide water treatment residuals (PAC-APAM WTRs) as an amendment in three types of soils with the ratios (w/w) of 10%, 15%, and 20% were evaluated for phosphorus adsorption from aqueous solutions by batch studies.
- Why is anionic polyacrylamide chosen?
- Anionic polyacrylamide is chosen because the intramolecular electrostatic repulsion between polymer segments forces the polymer chains to adopt a more extended conformation, increasing the efficiency of bridging flocculation.
- What is polyacrylamide (PAM) used for?
- npj Clean Water 1, Article number: 17 ( 2018 ) Cite this article High molecular weight (10 6 –3 × 10 7 Da) polyacrylamide (PAM) is commonly used as a flocculant in water and wastewater treatment, as a soil conditioner, and as a viscosity modifier and friction reducer in both enhanced oil recovery and high volume hydraulic fracturing.
- Can cationic polyacrylamide flocculants be used to treat oily water?
- Shu, G., Bu, K., Zhao, B. & Zheng, S. Evaluation of newly developed reverse demulsifiers and cationic polyacrylamide flocculants for efficient treatment of oily produced water. Colloids Surf. A 610, 125646 (2021). This work was supported by grants from the “Qihang Program” of the Southwest Petroleum University (2025QHZ001) awarded to C.Z.
