Improvement of the flocculation process in water treatment
Information about the open-access article 'Improvement of the flocculation process in water treatment by using moringa oleifera seeds extract' in DOAJ. DOAJ is an online directory that indexes and provides access to quality open access, peer-reviewed journals.
Coagulation-flocculation treatment method was essential of the applicable for water supply treatment. Coagulants were playing the main factors in this process. Environment friendly coagulants are
IMPROVEMENT OF THE FLOCCULATION PROCESS IN WATER TREATMENT
Improvement of the Flocculation Process in Water Treatment by Using Moringa oleifera Seeds Extract 497 Brazilian Journal of Chemical Engineering Vol. 29, No. 03, pp. 495 - 501, July - September, 2012 Table 1: Seed extract characterization data Parameter Value Units Dry residue (NaCl excluded) 3240 mg L-1
Improvement of flocculation process in water treatment by using Moringa oleifera seeds extract. Article (PDF Available) in Brazilian Journal of Chemical Engineering 29(3):495-502 · July 2012
Improvement of the coagulation/flocculation process using
Optimization of process conditions in water treatment through coagulation diagrams, using Moringa oleifera Lam and aluminium sulphate Karina Cardoso Valverde et al. Desalination and Water Treatment
1. Environ Technol. 2014 Sep-Oct;35(17-20):2227-36. Improvement of the coagulation/flocculation process using a combination of Moringa oleifera lam with anionic
The Improvement of Flocculation Basin in Water Treatment
The Improvement of Flocculation Basin in Water Treatment Process 정수처리정 플록형성지 효율향상 연구 Gang, Chang-Ho; Lee, Hyeon-Dong (Senior Researcher, Water Resources and Environmental Research Div., KICT) ; Yu, Jae-O 강창호 ((주)동일술 상하수도부) ;
Optimization of process conditions in water treatment through coagulation diagrams, using Moringa oleifera Lam and aluminium sulphate Karina Cardoso Valverde et al. Desalination and Water Treatment
Improvement of coagulation–flocculation process using
The residual metallic ion concentration after the coagulation–flocculation process varied from 0.24 to 0.98 for iron and from 0.093 to 0.90 for aluminium, which indicates that the coagulants did not remain in clarified water after the physicochemical treatment and that the iron content is lower than in raw water because of blood removed from
The activated sludge process is the most widely used technology in the field of wastewater treatment. Simultaneously, a large amount of excess sludge is produced as a by-product, which results in great economic and environmental burden to the society (Wang et al. 2014).So far, the moisture content of excess sludge is generally above 99.00% (Niu et al. 2013).
Improvement of coagulation-flocculation process using
A physicochemical treatment (coagulation-flocculation) was applied to a slaughterhouse wastewater, using anionic polyacrylamide as coagulant aid to improve the settling velocity of the flocs formed with the coagulants used: ferric sulphate, aluminium sulphate and polyaluminium chloride. The optimum speed and stirring time for the flocculation stage were ascertained along with the optimum pH
Improvement of water treatment pilot plant with Moringa oleifera extract as flocculant agent. Beltrán-Heredia J(1), Sánchez-Martín J. Author information: (1)Universidad de Extremadura, Department of Chemical Engineering and Physical Chemistry, Avda. de Elvas, s/n. 06071 Badajoz, Spain.
- Who is Nalco Water?
- A global leader in water and process management solutions, Nalco Water, an Ecolab company, works with customers across a wide range of industries to help minimize water and climate impacts while maximizing outcomes at an optimized total cost.
- Can silicon dioxide nanoparticles improve the performance of polyacrylamide (PAM)?
- Silicon dioxide (SiO) nanoparticles (NPs) have been recently proposed to increase the performance of polyacrylamide (PAM) for enhanced oil recovery (EOR) applications.
- Can polyacrylamide be used as a viscosifying agent?
- Polyacrylamide (PAM) and its derivatives as viscosifying agents have been widely used for PF application , , and could provide more oil recovery up to 60% .
- Can polyacrylamide improve hydrocarbon production efficiency?
- npj Materials Sustainability 2, Article number: 15 (2025) Cite this article Polyacrylamide (PAM) and its derivatives play a pivotal role in various facets of hydrocarbon development. Proper application and treatment of PAM have the potential to enhance hydrocarbon production efficiency while mitigating adverse environmental effects.
