cationic polyacrylamide(flocculant,pam)used for industrial
Anionic polyacrylamide: It is widely used in waste water treatment of chemical industry, municipal sewage treatment, such as coal washing, mineral processing, metallurgy, iron and steel industry and electronic industry.It is also used in oil industry to enhance oil recovery which is widely used. In addition, it can be used as paper additives and textile pulp agent.
Cationic polyacrylamide (CPAM), is often used asflocculantin water treatment and sludge dewatering.
cationic polyacrylamide used for industrial wastewater
Cationic polyacrylamide used for industrial wastewater treatment. Chinafloc c3012 has demonstrated to be highly-effective in removing suspended particles and impurities from various types of wastewater. Polyacrylamide is a linear polymer comprised of monomers unit with functional groups of amide that adsorb on to the surface of particles.
Polyacrylamide and its co-polymers are used as flocculants or coagulants in industrial wastewater treatment .Homo-polymer is used in this application and can be either nonionic, cationic or
Polyacrylamide Uses
Application of Polyacrylamide. 1. PAM in water treatment field PAM for domestic sewage and organic wastewater treatment, PAM distribution or alkaline medium showed a cationic, so that the sewage effluent suspended particles with a negative charge of flocculation, clarification is very effective. Such as the production of grain alcohol wastewater, wastewater, urban sewage treatment plant
In this study, a cationic block structure with a strong neutralizing ability was formed through template polymerization. Acryloxyethyltrimethyl ammonium chloride (DAC) and acrylamide (AM) were used as monomers, and the ionic homopolymer sodium polyacrylate (NaPAA) was used as the template.
UV-Initiated Graft Copolymerization of Cationic Chitosan
Removal of emulsified oil from water using hydrophobic modified cationic polyacrylamide flocculants synthesized from low-pressure UV initiation. Separation and Purification Technology 2025 , 197 , 407-417.
Two cationic polyacrylamides, PAA and PAD, were synthesized for sludge dewatering. The advanced instruments such as 1H NMR, FTIR, and SEM were used to characterize the two copolymers. Their hydrophobic association properties in water were investigated by viscosimetry as well as the dewatering performance studied by the sludge dewatering experiment.
Fabricating a Flocculant with Controllable Cationic
Synthesis of a cationic polyacrylamide by a photocatalytic surface-initiated method and evaluation of its flocculation and dewatering performance: nano-TiO 2 as a photo initiator. RSC Advances 2025, 8 (50) , 28329-28340. DOI: 10.1039/C8RA05622F.
The hydrophobically associating cationic polyacrylamide, one kind of water-soluble hydrophobically associating copolymers, was polymerized by cationic monomer, hydrophobic monomer and acrylamide. As can be imagined, both cationic group and hydrophobic group were incorporated into the polymer molecule chain.
Degradation and transfer of polyacrylamide based
Jar test experiments showed that a higher weight (8.106 g/mol; (+) 24%) cationic polyacrylamide gave good flocculation results, with turbidity- and CODparticulate removal efficiencies of 65-90%
Full Article. Application of Amphoteric Polyacrylamide Solely or with the Combination of Cationic Starch for Paper Strength Improvement. Peipei Wang, a Yangyang Zhu, a,b Xiaoyan Wang, a Xinyu Zhang, a Wenyuan Zhu, a Chunli Yao, c and Junlong Song a, * Water-soluble amphoteric polyacrylamide (AmPAM) has been widely used in papermaking as one of the agents for the improvement of dry strength.
- What is partially hydrolyzed polyacrylamide (PHPA)?
- Partially hydrolyzed polyacrylamide (PHPA), consisting of neutral acrylamide and anionic acrylate groups, is suitable for use in water with <25,000 mg/L TDS 12, 15.
- Can silica nanoparticles improve rheological properties of partially hydrolyzed polyacrylamide?
- This work aims to improve the rheological properties of partially hydrolyzed polyacrylamide (HPAM) for enhanced oil recovery by using silica (or silicon dioxide, SiO2) nanoparticles (NPs). Novel aq...
- What is partial hydrolyzed polyacrylamide (HPAM)?
- Partially hydrolyzed polyacrylamide (HPAM) is a water-soluble polymer material used in oil fields [ 18, 19 ]. It usually has a linear structure with high molecular weight [ 20] and is obtained by partial hydrolysis of PAM or by copolymerization of sodium acrylate with acrylamide [ 21 ].
- Which polymer is used to produce partially hydrolyzed polyacrylamide (HPAM)?
- PAM is used to produce partially hydrolyzed polyacrylamide (HPAM), which is linear, anionic, water-soluble, stable, polymeric, and high molecular weight chain of acrylamide (C 3 H 5 NO) monomers (Bao et al., 2010; Braun et al., 2025; Liu et al., 2016; Xiong et al., 2018).
