Polyacrylamide | Spectrum
Polyacrylamide, 50 Percent Aqueous Solution, also called poly (1-carbamoylethylene), is a polymer formed from acrylamide sub-units used to flocculate solids in a liquid. Ungraded products supplied by Spectrum are indicative of a grade sui.
Good Quality Nonionic Polyacrylamide Polymer Viscosifier Dewatering Pam Flocculant Polymer , Good Quality Nonionic Polyacrylamide Polymer Viscosifier Dewatering Pam Flocculant Polymer,Nonion Polyacrylamide,Polymer,Pam
Non-ionic polyacrylamide
Non-ionic polyacrylamide 9003-05-8,Used as flocculant for treatment of industrial wastewater and for treatment of drinking water, accessory ingredient for oilfield profile control and water plugging, accessory ingredient for drilling fluid,
Product Information. Supercone-KTS is a concentrated, non-yellowing, non hydrophobic economical organic softener for cotton yarns, knits, wovens, wool, silk and garments. Supercone-KTS gives excellent softness to the fabric. Supercone-KTS can be
Anionic polyacrylamide as flocculants for water treatment
Anionic polyacrylamide easily dissolve in water,but nearly not dissolve in organic solvent.It has high polymer electrolytical properties in middle and alkalinity media.While it’s sensitive to salt electrolytes and it can to form insoluble gels
Nonionic surfactants have covalently bonded oxygen-containing hydrophilic groups, which are bonded to hydrophobic parent structures.These Nonionic surfactants, are not ionized in water, and contain both hydrophilic groups (e.g.
polyacrylamide for waste water treatment chemical cationic polyacrylamide
polyacrylamide for waste water treatment chemical cationic polyacrylamide 9003-05-8,flocculant、adhesivity、thickening、auxiliary agent、Sludge dewatering agent、coagulant_OKCHEM 1) It is used for sludge dewatering, which can effectively dewater
Advantage Description Polyacrylamide Cationic Polymer Coagulant Cat-floc 8103 Plus , Polyacrylamide Cationic Polymer Coagulant Cat-floc 8103 Plus,Cat-floc 8103,Cat-floc 8103 Plus,Cat-floc 8103 Plus from Electronics
Paper-Making Additives APAM Anionic Polyacrylamide Supplier Drying Agent
polyacrylamide, kationisch mit kationenstrke >15 % polyacrylamide, kationisch mit kationenstrke >15 % polyacrylamide, kationisch mit kationenstrke >15 % efk 1 (flotation agent)(9ci) c.i. fluorescent brightening agent 41 color developing
Nonionic Polyacrylamide/NPAM with Best Cost Performance!!! Appearance: White Powder Solid Content: ≥ 88% Molecular Weight: 8-12 Degree of Hydrolysis: ≤ 6 Dissolving Time: ≤ 60min Applications: The washing of coal ore auxiliary in textile
Pam Anionic Polyacrylamide.. Supplier from Cooking. Product Id 620748.
Name:PAM Anionic Polyacrylamide 1.CAS NO 9003-05-8 HS Code 3906901000 2.EINECS No 201-173-7 3.MF [CH2=CHCONH2]n 4.appearance white crystal powder 5.Specification: Polyacriylamide Anionic PAM 5-8 million Molecular weight:5-8 million Solid
Anionic Polyacrylamide is soluble in organic solvents and is known for its high polymer electrolyte characteristics in neutral and alkaline mediums. It is sensitive to salt electrolyte, and can be cross-linked into an insoluble gel with metal
- What is poly aluminum-ferric chloride (PAFC)?
- Author to whom correspondence should be addressed. Poly aluminum-ferric Chloride (PAFC) is a new type of high efficiency coagulant. In this study, high iron type gangue is used as a main raw material. It is calcined at 675 °C for 1 h and 3% CaF 2 is added to the calcined powder and reacted with 20% hydrochloric acid at 93 °C for 4 h.
- Is polyaluminium ferric chloride a composite coagulant?
- Gao, B.; Yue, Q.; Miao, J. Evaluation of polyaluminium ferric chloride (PAFC) as a composite coagulant for water and wastewater treatment. Water Sci. Technol. 2003, 47, 127. [ Google Scholar] [ CrossRef] [ PubMed]
- Do poly aluminum chloride and poly ferric sulfate affect was digestion?
- Poly aluminum chloride (PAC) and poly ferric sulfate (PFS) are widely used in wastewater treatment and sludge dewatering, resulting in their amounts being accumulated substantially in waste activated sludge (WAS). Till now, however, little information about their influence on WAS digestion is available.
- Why are ferric salts better than aluminium salts?
- This induces faster floc development resulting in faster settling rates , and it will be easily removed during the filtration process as less iron residue is formed . The flocs formed from the use of ferric salts are larger than those using aluminium salts , and are more compact .
