Flocculant (Pam,polyacrylamide)for wastewater treatment
Flocculant (Pam,polyacrylamide)for wastewater treatment. 1) Appearance: white granule 2) Molecular weight: 5 - 22 million minimum 3) Granule: 20 - 100 mesh 4) Solid content: 88% minimum 5) Hydrolyzing degree: 10 - 20%, 20 - 30% or 30 - 40%
Polyacrylamide is a versatile chemical treatment agent in oilfield. In oil extraction it could be used as a flooding agent, water shutoff regulator, drilling fluid regulator, fracturing fluid additives, especially in cementing, completion and workover. The oil industry is the largest area of polyacrylamide applications.
Sinofloc's Polyacrylamide (PAM) Application in Oilfields
Polyacrylamide (PAM) is not only a high-performance flocculants, but also a very good thickener because of the high viscosity. Due to its thickening, flocculation and regulation of rheological properties, PAM could be used as a variety of additives, such as drilling fluids, fracturing fluids, and additives in Enhanced Oil Recovery (EOR).The key point to get the best performance of
Typical Applications: Oilfield chemicals, waste water treatment chemicals. Polyacrylamide (PAM) is a high molecular polymer, which has good solubility in water, and good flocculability. Specially, the flocculating performance will be even better when using the mixture of PAM and inorganic flocculants (such as poly aluminium chloride).
The Effect of the Flocculants PAM and PAC - Polyacrylamide
In the treatment of the domestic sewage, there are two types of the water flocculants: the PAM (Polyacrylamide) and the PAC (Polyaluminium Chloride).The domestic sewage is the waste water which is directly discharged by the residents in the daily life, the major component is the stool and the washing waste water.
SINOFLOC nonionic flocculants are technically pure polyacrylamides.Nonionic polyacrylamide exhibits neutral nonionic properties in the aqueous solution which is hardly influenced by the PH value in the application. SINOFLOC nonionic flocculants are suitable for use as a settlement aid in many different mineral-processing applications and are particularly effective under very low PH conditions
Anionic Polyacrylamide Chemicals Flocculant Water
Anionic Polyacrylamide Chemicals Flocculant Water Treatment Polymer. 1. Product characteristics. Anionic polyacrylamide (APAM) series products are water-soluble linear polymers synthesized under high degree polymerization, easily soluble in water, almost insoluble in the benzene, the ether, the aliphatics, the acetone and other common organic solvents. . At the meantime, APAM series products
Solenis is a leading producer of specialty chemicals for water-intensive industrial operations. In addition to offering innovative chemical solutions—process aids, water technologies and functional additives—the company also offers an advanced suite of monitoring and control systems, all fully backed by expert insight and support. ©2025
Surface chemistry of oil-sands clay minerals
Regarding the surface chemistry of oil-sands clay minerals, the relevant length scales of the atomic and mineral constituents plotted on a logarithmic scale of nanometers (10 – 9 m) are shown in Figure 1.In the size range of <0.2 nm are the effective ionic radii of the atomic constituents of oil-sands clay minerals and the ions associated with the surfaces (e.g. Na +, K +, Ca 2+, and Mg 2+).
BASF Venture Capital GmbH has invested $13.5 million in Allylix, Inc., a U.S.-based renewable specialty chemicals company. The BASF subsidiary led a $18.2 million financing round , joined by existing investors Tate & Lyle Ventures, Avrio Ventures and Cultivian Ventures.
polyacrylamide gel isoelectric
Comparison of polyacrylamide and agarose gel thin-layer isoelectric focusing for the characterization of beta-lactamases.. PubMed. Vecoli, C; Prevost, F E; Ververis, J J; Medeiros, A A; O'Leary, G P. 1983-08-01. Plasmid-mediated beta-lactamases from strains of Escherichia coli and Pseudomonas aeruginosa were separated by isoelectric focusing on a 0.8-mm thin-layer agarose gel with a pH
Full text of "Non-commodity chemicals : development opportunities in Alberta" See other formats
- Can pharmaceuticals be removed from wastewater?
- The removal of emerging contaminants such as pharmaceuticals from wastewater is also discussed. Industries are significant water consumers. On a global scale, they consume ~22% of the total water produced, whereas, in high-income counties, it can reach up to 60%.
- Can electrocoagulation be used to treat heavy metals containing wastewater?
- Petsriprasit, C., Namboonmee, J. & Hunsom, M. Application of the electrocoagulation technique for treating heavy metals containing wastewater from the pickling process of a billet plant. Korean J. Chem. Eng. 27, 854–861 (2010).
- How efficient is EC in wastewater treatment?
- The efficiency of EC depends on the type of wastewater. For example, COD removal by EC in textile wastewater has been found to be from 40 to 70%, 96% for soluble oils, and 80% for paper waste 137. One of the key factors to consider when using EC for the treatment of industrial wastewater is the electrode material.
- Which technology is used to treat biologically recalcitrant effluents 172?
- Advanced technologies that are based on chemical oxidation are usually used to treat biologically recalcitrant effluents 172. Electrochemical reactions are additionally utilized for disinfection purposes by generating oxidizing species.
