Water Treatment Chemical Flocculant Nonionic Anionic
Water treatment chemical flocculant nonionic anionic cationic polyacrylamide is packaged in two-layer bag with the interior in plastic and the exterior in paper. The weight of each bag is 25kg. The weight of each bag is 25kg.
best Anionic Polyacrylamide Powder, Cationic Polyacrylamide Powder and Wastewater Treatment Chemical supplier, we has good quality products & service from China.
The use of cationic, anionic and nonionic polyacrylamide
Textile printing and dyeing wastewater, with cationic polyacrylamide than with anionic polyacrylamide, nonionic polyacrylamide or inorganic salt effect to several times or dozens of times, because this kind of wastewater generally with the negative charge of water plant water treatment flocculant. : the product with less dosage, good effect, low cost characteristics farewell is better and inorganic flocculants.
established in 2011, we specialize in supplying cationic polyacrylamide, anionic polyacrylamide and nonionic polyacrylamide.
Anionic Poly-Acrylamide (aPAM)
ANIONIC POLYACRYLAMIDE. Composition: Negatively charged copolymers of acrylamide are widely used as retention aids and dry-strength resins. However, different molecular mass ranges are used for these two roles. Anionic acrylamide copolymer retention aids typically have molecular masses in the range of 5 to 20 million grams per mole.
After years of time, it has been proved that the cationic polyacrylamide has an unparalleled advantage over other ionic polyacrylamide products in the field of sludge dewatering. TEL:86-10-8595 8198 FAX:86-10-8595 8191
Industrial Grade Chemical Anionic Products For Oil Field
Nonionic polyacrylamide is mainly used as flocculants with high selectivity in oil well fluid,and acidic waste water treatment. Amphoteric Polyacrylamide: Amphoteric polyacrylamide is mainly used high difficult waste water treatment or sludge dewatering reagents in oil refining and chemical industry or papermaking industry.
Anionic high molecular weight polymers are used for flocculating negatively charged particles by interaction with suitable cationic adsorption sites e.g. Ca 2+, Mg 2+, Al 3+, Fe 2+ and Fe 3+. Nonionic polyacrylamides are very effective in mineral and textiles processing applications.
Anionic /cationic/nonionic emulsion polyacrylamide
Anionic /cationic/nonionic emulsion polyacrylamide is a high-efficiency and high-content liquid flocculant of our company. It adopts the advanced technology of water-in-oil and uses W/0 emulsifier to polymerize in oil medium with high conversion rate and high. Molecular weight, high stability, versatility, and instant dissolution.
China Chemical Flocculant Nonionic /Anionic/ Cationic Polyacrylamide PAM, Find details about China PAM, Flocculant from Chemical Flocculant Nonionic /Anionic/ Cationic Polyacrylamide PAM
industrial chemical anionic polyacrylamide for textile
The use of cationic, anionic and nonionic polyacrylamide . Textile auxiliaries: add some chemicals can be equipped with chemical data for textile sizing. Sand: nonionic polyacrylamide dissolved into 0.3% concentration of cross-linking agent, spraying in the desert, to prevent sand fixing effect.
China Nalco Snf Cationic Anionic Polyacrylamide PAM Resin for Oil Drilling, Find details about China Polyacrylamide, PAM from Nalco Snf Cationic Anionic Polyacrylamide PAM Resin for Oil Drilling
- What is an anionic polyacrylamide?
- The anionic polyacrylamides in the oil field industry are designated by the generic name of partially hydrolyzed polyacrylamide (PHPA), although they are in actuality copolymers . Both high- and low-molecular-weight polymers are used as drilling fluid additives.
- What is polyacrylamide (PAM) used for?
- npj Clean Water 1, Article number: 17 ( 2018 ) Cite this article High molecular weight (10 6 –3 × 10 7 Da) polyacrylamide (PAM) is commonly used as a flocculant in water and wastewater treatment, as a soil conditioner, and as a viscosity modifier and friction reducer in both enhanced oil recovery and high volume hydraulic fracturing.
- What is nonionic polyacrylamide?
- Nonionic polyacrylamides represent the smallest group of acrylamide-based polymers, representing about 25% of the total polyacrylamide market. Nonionic polyacrylamide is somewhat misleading since in the manufacture of acrylamide, regardless of the route, some degree of hydrolysis of acrylamide occurs.
- What is high molecular weight polyacrylamide (PAM)?
- Provided by the Springer Nature SharedIt content-sharing initiative High molecular weight (106–3 × 107 Da) polyacrylamide (PAM) is commonly used as a flocculant in water and wastewater treatment, as a soil conditioner, and as a viscosity modifier and friction reducer in both enhanced oil recovery and high volume hydraulic fracturing.
